Ukunikezwa kwamandla kagesi | I-AC 220V, 50Hz |
Amandla | 300W |
Hlola isiteshi | Iziteshi ezi-4 ezingazodwa |
Ukunemba | 12 kancane |
Ibanga lamandla | 6pF ~250 μF |
Izinga lokushisa | -10 ~ 45 ℃ |
Umswakama Ohlobene | ≤ 95%, ayinciphisi |
Izinga lokuhlola | 20 M/s |
Ukuzwela | 0.1 pc |
● Iziteshi zokuhlola: Amashaneli angu-4 angawodwa
● Ibanga lomthamo wesampula: 6pF ~250 μ F
● Ukuzwela: 0.1 pC
● Ukunemba: 12 bit
● Izinga lesampula: 20 M/S
● Imodi yokubonisa:
a) Bonisa: Umugqa we-Ellipse-sine-straight
b) Qalisa indlela yokuvumelanisa: yangaphakathi: 50Hz, ngaphandle: 50 ~ 400Hz
c) Ukunqunywa kwesigaba sesignali: isibonisi se-ellipse sikumodi yokuxhumanisa indawo epholile, i-sine iboniswa kumodi ye-sine wave, indawo yokuqala yegrafu yokubonisa iyiphoyinti elinguziro lokunikezwa kwamandla okuhlola, futhi ubude begrafu yokubonisa umjikelezo owodwa we amandla okuhlola. Isistimu iyiqiniso futhi inembile kumodi yokuvumelanisa yesiqalisi sangaphandle Ibonisa umjikelezo nesigaba sokuhlolwa kwamandla kagesi.
d) Iwindi lesikhathi: Usayizi wesigaba ungakhethwa ngokungafanele, futhi iwindi lesikhathi lingakhuliswa ngamandla futhi liboniswe. Amafasitela ezikhathi ezimbili angavulwa ngokuhlukana noma ngesikhathi esisodwa.
e) Ibhendi yefrikhwensi yokuhlunga: 3dB low-frequency end frequency L ihlukaniswe ngamagiya angu-10, 20, 40kHz, 3dB high-frequency end frequency fH ihlukaniswe ngamagiya angu-80, 200, 300kHz, futhi singakwazi ukuhlanganisa ngokuguquguqukayo amaphasikhodi okuhlunga ahlukahlukene.
I-amplifier yesignali
a) Ukulungiswa kwenzuzo: Thola ukulungiswa okuqinile futhi uthole ukulungiswa okuhle, ukulungiswa kwenzuzo eqinile kuhlukaniswe ngamagiya angu-5, umehluko wokuzuza phakathi kwamagiya ngu-20dB (izikhathi eziyi-10), iphutha lilungiswa ngu-±1dB; uhla lokucushwa kahle lokuzuza>20dB
b) I-asymmetry yempendulo ye-polarity ye-amplifier ephozithivu nenegethivu: <1dB.
c) Isilinganiso sesignali sokukhipha ingxenye: Isignali yokukhishwa kwengxenye ingalinganiswa ngezindlela eziqhubekayo, ezikhulisiwe nezinye zokubonisa ngephutha elingu-±5% (ngesilinganiso esigcwele).
d) Imisebenzi yokugcina nokudlala, umsebenzi wokuphrinta, kanye nokukhiqiza umbiko wokuhlola ojwayelekile
e) Izinga lokushisa lokusebenza: -10 ~ 45 ℃
f) Umswakamo ohlobene: ≤ 95%, ongajiki
g) Ukunikezwa kwamandla: AC 220V, 50Hz
h) Amandla: 300 W
1.Asikho isidingo sokuxhumana nengxenye ebukhoma ye-switchgear, ukuhlolwa okuphephile nokusheshayo.
2.Asikho isidingo sokucisha ugesi phakathi nenqubo yokuhlola, asikho isidingo sokunikezwa kwamandla okuhlola i-HV.
3.Khomba kahle i-switchgear ngisho nangaphansi kokuhlolwa okukodwa, futhi wakhe isizindalwazi sesimo saso
4.Ngomsebenzi wokuhlola we-ultrasonic, futhi ingasetshenziselwa ukuhlolwa kokukhishwa kwengxenye ye-SF6 ring main unit kanye nezintambo.
5.Inzwa ye-ultrasonic ne-TEV eyakhelwe ngaphakathi.
I-6.Ifakwe ngesistimu yokusebenza ehlakaniphile, kulula ukuyisebenzisa.