5KV AC 6KV DC Hipot Tester Insulation Resistance Tester
Isihlaziyi Sokuthobela Ukuphepha Kogesi Esihlelekayo I-AC DC Simelana nesihloli se-Voltage Hipot
Ithuluzi lisebenzisa ubuchwepheshe bokukhulisa umugqa ukuze kukhiqizwe ukuphuma kwegagasi kwe-sine okuhlanekezela kancane, okwenza ukuhlolwa kunembe kakhudlwana. Ukusetshenziswa kwesikrini se-LCD esinezinhlamvu ezinkulu ezingu-16×2 kanye nemodi yokusebenza esebenzisanayo esebenziseka kalula ikwenza kucace futhi kube lula kubasebenzisi ukukuqonda. Imiphumela yokuhlolwa nezimo zokuhlola ziboniswa ngesikhathi esifanayo, okwenza abasebenzisi bazizwe bekhululekile mayelana neziphetho zokuhlola.
Amapharamitha wobuchwepheshe we-Hipot Tester
|
I-AC imelana nokuhlolwa kwe-Voltage |
I-voltage yokuphumayo | Ibanga: 0-5000V, 0-12mA, isixazululo 10V |
| Ukunemba: ± (2% inani lesethi + 5V) | ||
| Ukuvama kokuphumayo | 50Hz/60Hz okukhethekayo | |
| I-waveform yokuphumayo | I-Sine wave, degree distortion <2% | |
| Ukulungiselelwa komkhawulo ophezulu | Ibanga: 0.10-12.00mA, isixazululo 0.01mA Ukunemba: ± (2% set value + 2 amagama) |
|
| Ukusetha umkhawulo ophansi | Ububanzi: 0.00-12.00mA, ukulungiswa kwe-0.01mA Ukunemba: ± (2% set value + 2 amagama) |
|
| Ukutholwa kwe-arc | Izinga 1-9 | |
|
I-DC imelana nokuhlolwa kwe-Voltage |
I-voltage yokuphumayo | Ububanzi: 0-6000V, ukulungiswa: 10V, ukunemba: ± (2% set value + 5V) |
| Okukhiphayo ripple | <5% (6KV/5mA) ihlolwe ngaphansi komthwalo womugqa | |
| Ukulungiselelwa komkhawulo ophezulu | Ububanzi: 0.02-5.00mA, ukulungiswa: 0.01mA Ukunemba: ± (2% inani lesethi + amagama angu-2) | |
| Ukusetha umkhawulo ophansi | Ububanzi: 0.00-5.00mA, ukulungiswa kwe-0.01mA Ukunemba: ± (2% inani lesethi + amagama angu-2) | |
| Ukukhipha okuzenzakalelayo | 200mS | |
|
Control interface |
Okokufaka: hlola (TEST), setha kabusha (SETHA KABUSHA) Okukhiphayo: Ukuhlolwa kuphumelele (PASS), ukuhlolwa kuhlulekile (FAIL) Ukuhlola kuyaqhubeka (TEST-IN-PROCESS) |
|
|
Ukulungiselelwa kokukhuphuka okunensayo |
0.1-999.9 imizuzwana | |
|
Isikhathi sokuhlola |
Ibanga: 0.5-999.9 imizuzwana (0= ukuhlolwa okuqhubekayo) | |
|
Indlela yokukhipha umphumela wokuhlola |
I-Buzzer, ukufundwa kwesibonisi se-LCD, lawula ukuphuma kwesimo sokusebenzelana | |
|
Iqembu lenkumbulo |
Amaqembu ama-5 ezimo zokuhlola abanjwa ngekhanda, iqembu ngalinye linezinyathelo ezi-3 zokuhlola okufanele lizikhethe | |
|
Gada |
Isibonisi se-LCD esingu-16×2 esinokukhanya kwangemuva | |
|
Ukuhlolwa kokumelana ne-Insulation |
I-voltage yokuphumayo | Ububanzi: DC100-1000V, isinqumo 10V Ukunemba: ± (2% inani lesethi + 5V) |
| Ibanga lokumelana | Ububanzi: DC100-1000V, isinqumo 10V Ukunemba: ± (3% set value + 2 amagama) voltage ≥ 500V ± (7% inani lokusetha+ amagama angu-2) i-voltage (500V). |
|
| Ukulungiselelwa komkhawulo ophezulu | Ibanga elifanayo lokumelana, isikhala esingu-1MΩ | |
| Iphoyinti elimisiwe lomkhawulo ophansi | Ibanga elifanayo lokumelana, isikhala esingu-1MΩ | |
Izici mayelana nale AC DC Withstanding Voltage Hipot Tester
1. 16×2 isibonisi esikhulu se-LCD sezinhlamvu
2. Okuphumayo kwegagasi kwe-sine okuhlanekezelwe okuphansi
3. Amaqembu ama-5 okusetha uhlelo nomsebenzi wememori
4. Umsebenzi wokusetha irempu kagesi
5. Umsebenzi wokuthola i-arc oyingqayizivele, ukuhlonza iphutha kunembe kakhulu
6. I-AC ne-DC imelana nomsebenzi wokuhlola i-voltage/insulation
Okulandelayo yizithombe zangempela zomkhiqizo nezithombe zokupakishwa zalesi sihlaziyi se-voltage Esihlelekayo
