5KV AC 6KV DC Hipot Tester Insulation Resistance Tester
Electrical Safety Compliance Analyzer Programmable AC DC Withstanding Voltage Hipot Tester
Icho chiridzwa chinoshandisa mutsara amplification tekinoroji kuburitsa yakaderera-kukanganisa sine wave kubuda, zvichiita kuti bvunzo inyatsojeka. Kushandiswa kwe16 × 2 hombe-character LCD kuratidza sikirini uye mushandisi-inoshamwaridzana inopindirana maitiro ekuita inoita kuti zvive pachena uye nyore kune vashandisi kunzwisisa. Mhedzisiro yebvunzo uye mamiriro ebvunzo anoratidzwa panguva imwe chete, izvo zvinoita kuti vashandisi vanzwe vakasununguka pamusoro pemhedzisiro yebvunzo.
Technical parameters yeHipot Tester
|
AC Inomira Voltage Muedzo |
Output voltage | Range: 0-5000V, 0-12mA, sarudzo 10V |
| Kururama: ± (2% set value + 5V) | ||
| Output frequency | 50Hz/60Hz inosarudzwa | |
| Output waveform | Sine wave, distortion degree <2% | |
| Upper limit setting | Range: 0.10-12.00mA, sarudzo 0.01mA Kururama: ± (2% set value + 2 mazwi) |
|
| Lower limit setting | Range: 0.00-12.00mA, kugadzirisa 0.01mA Kururama: ± (2% set value + 2 mazwi) |
|
| Kuonekwa kweArc | Nhamba 1-9 | |
|
DC Inomira Voltage Test |
Output voltage | Range: 0-6000V, kugadzirisa: 10V, kunyatsoita: ± (2% set value + 5V) |
| Output ripple | <5% (6KV/5mA) yakaedzwa pasi pemutoro wemutsara | |
| Upper limit setting | Range: 0.02-5.00mA, kugadzirisa: 0.01mA Kururama: ± (2% set value + 2 mazwi) | |
| Lower limit setting | Range: 0.00-5.00mA, kugadzirisa 0.01mA Kururama: ± (2% set value + 2 mazwi) | |
| Automatic discharge | 200mS | |
|
Kudzora interface |
Kupinza: bvunzo (TEST), gadzirisa (RESET) Kubuda: Muedzo wakapfuura (PASS), bvunzo yakundikana (FAIL) Kuyedzwa kuri kuitika (TEST-IN-PROCESS) |
|
|
Slow rise setting |
0.1-999.9 masekondi | |
|
Nguva yekuedza |
Range: 0.5-999.9 masekondi (0 = inoenderera bvunzo) | |
|
Muedzo mhedzisiro yekubuda nzira |
Buzzer, LCD kuratidza kuverenga, control interface mamiriro ekubuda | |
|
Memory group |
Mapoka mashanu emamiriro ebvunzo anodzidzwa nemusoro, boka rega rega rine matanho matatu ebvunzo ekusarudza | |
|
Monitor |
16 × 2 LCD inoratidzira ine backlight | |
|
Insulation Resistance Test |
Output voltage | Range: DC100-1000V, sarudzo 10V Kururama: ± (2% set value + 5V) |
| Resistance range | Range: DC100-1000V, sarudzo 10V Kururama: ± (3% set value + 2 mazwi) voltage ≥ 500V ± (7% kuseta kukosha+2 mazwi)voltage＜500V |
|
| Upper limit setting | Same kuramba renji, spacing 1MΩ | |
| Lower limit set point | Same kuramba renji, spacing 1MΩ | |
Zvimiro nezve iyi AC DC Inomira Voltage Hipot Tester
1. 16×2 hombe hunhu LCD kuratidza
2. Linear, low distortion sine wave kubuda
3. 5 mapoka ekugadzirisa purogiramu uye basa rekuyeuka
4. Voltage ramp setting basa
5. Yakasarudzika arc yekuona basa, chikanganiso chiziviso chakanyanya kunaka
6. AC uye DC inomira voltage / insulation test function
Aya anotevera ndiwo chaiwo echigadzirwa mifananidzo uye kurongedza mapikicha eiyi Programmable inomira voltage analyzer
