what’s the oil bdv tester is uesd for? and how to use?

what’s the oil bdv tester is uesd for?

An oil BDV (Breakdown Voltage) tester is used to measure the dielectric strength of insulating oils, typically in transformers and other electrical equipment. It determines how well the oil can withstand electrical stress without breaking down. A higher breakdown voltage indicates better insulating properties, which is crucial for ensuring the safe and efficient operation of electrical systems. Regular testing helps in assessing the quality and condition of the oil, indicating if it needs to be replaced or if the equipment requires maintenance.

How to use the Oil Breakdown Voltage tester?
Using an oil BDV tester generally involves the following steps:

 1. Preparation: Ensure the tester is clean and calibrated. Gather the necessary equipment, including the oil sample and safety gear.

 2. Sample Collection: Collect a representative sample of the insulating oil, making sure to avoid contamination.

3. Fill the Test Cell: Pour the oil sample into the test cell of the BDV tester, typically to the specified fill line.

4. Setup: Connect the test cell to the BDV tester, ensuring all connections are secure.

 5. Apply Voltage: Start the tester, which will gradually increase the voltage applied across the oil sample. The tester will monitor the voltage until breakdown occurs.

6. Record Results: Once the oil breaks down (indicated by a spark or flash), the tester will display the breakdown voltage. Record this value for analysis.

7. Clean Up: Safely dispose of the used oil sample according to local regulations and clean the test equipment.

8. Interpret Results: Compare the breakdown voltage with acceptable standards to assess the quality of the insulating oil.

oil dielectric strength tester


Post time: Oct-30-2024

Leave Your Message:

Write your message here and send it to us.