Fitar Wutar Lantarki |
0 ~ 100 kV |
Matsakaicin Karɓar Ƙarfi |
<3% |
Ƙarfin Ƙarfafawa |
1.5 kVA |
Saurin haɓakawa |
0.5 ~ 5.0 kV/s (Mai daidaitawa) |
Lokacin Huta |
Minti 15 |
Ƙarfafa Tazara |
Minti 5 |
Yawan Ƙarfafawa |
1 ~ 9 |
Samar da Wutar Lantarki |
AC 220V ± 10% |
Mitar Wuta |
50 Hz |
Amfanin Wuta |
200w |
Yanayin Aiki |
0 ~ 45 ℃ |
Danshi na Dangi |
≤75% RH |
Girma |
465×385×425(mm) |
1.Wannan kayan aiki yana amfani da microprocessor don kammala ayyukan kamar haɓakawa, riƙewa, motsawa, sakin layi, lissafi, bugu ta atomatik., Kuma zai iya yin gwajin matsa lamba na mai a cikin kewayon 0-100KV.
2.Large-allon LCD nuni
3.Sauƙaƙan aiki, mai aiki kawai yana buƙatar yin saitunan sauƙi, kuma kayan aiki za su kammala gwajin matsa lamba na 1 kofin man fetur bisa ga saitunan. Ƙimar lalacewar wutar lantarki da lokutan zagayowar sau 1 zuwa 6 ana adana ta atomatik. Bayan an gama gwajin, firintocin na iya buga ƙimar ƙarancin wutar lantarki da matsakaicin ƙimar kowane lokaci.
4.Power-off retaining, gwajin sakamakon gwajin har zuwa saiti 100, kuma zai iya nuna yanayin zafi da zafi na yanzu.
5.The single-chip microcomputer ana amfani da shi don haɓaka ƙarfin lantarki a saurin gudu, kuma mitar ƙarfin lantarki daidai ne zuwa 50HZ, wanda ya sa dukan tsari mai sauƙi don sarrafawa.
6.With over-voltage, over-current, iyaka kariya, da dai sauransu, don tabbatar da amincin masu aiki.
7.With aikin nunin ma'aunin zafin jiki da nunin agogon tsarin.
8.Standard RS232 interface, wanda zai iya sadarwa tare da kwamfuta.