20A Circuit Breaker Tester Switch Timing Tester
This is 20A circuit breaker analyzer, our engineer will show you ho to operate this test equipment:
20A Circuit Breaker Analysis Automatic CB Tester High Voltage Switch Circuit Breaker Timing Tester
High Voltage Circuit Breaker Dynamic Characteristic Tester be used for measure the mechanical dynamic characteristic parameters of low oil, vacuum, SF6 and other high-voltage circuit breakers.
Ⅰ: Technical Parameters of this circuit breaker tester:
|
Item
|
Parameters |
Accuracy |
|
Power Supply |
110V/60Hz |
|
|
Air pressure
|
86 ~ 106 KPA
|
|
|
Temperature
|
－10～40℃
|
|
|
Relative Humidity
|
≦80%RH, non-condensing
|
|
|
Insulation Resistance
|
＞2MΩ
|
|
|
Dielectric strength
|
1.5KV withstand voltage to chassis for 1 minute,
no flashover and arcing |
|
|
Timing
|
Range:250-4000ms, resolution: 0.1ms
Range:10000-20000ms, resolution: 1ms |
0.1ms±1 digit
1m± 1 digit |
|
Speed
|
Range: 20.00m/s, resolution: 0.001m/s
|
±0.01m/s±1 digit
|
|
Current
|
Range: 20A, Resolution: 0.01A
|
1% ±0.1A
|
|
Output Power
|
DC5 – 270V digital adjustable 20A(instant)
|
Ⅱ: Features about the Circuit Breaker Analysis Test Equipment:
1. Measure the inherent opening and closing time of 12-way metal fracture, time tolerance in same phase, time tolerance in different phase,close-open time and no flow time in process of close-open, open-close, open-close-open, closing bounce time,Some models can measure the pre-cast time of the closing resistance.
2. Record and measure the closing bounce time, bounce times, bounce process, and bounce waveform of each fracture.
3. Record and measure opening/closing speed, maximum speed, average speed, overall limit, clearance, overtravel limit switch,rebound amplitude, time-travel characteristic curve.
4. Record the opening/closing current value and current waveform of the opening/closing coil, and provides DC5-270V/10A (20A) digital adjustable circuit breaker operation power supply, automatically completes the low voltage test of the circuit breaker, and measures the operating voltage value of the device.
5. Simultaneously measure 6-way closing resistance value and its pre-casting time in some models.
Ⅲ: Detailed pictures of this circuit breaker Dynamic Characteristics Tester:
Ⅳ: Service for the electric test equipment of Run Test:
The instrument will be repaired and replaced free of charge for product quality problems within one year from the date of purchase, and will provide lifetime warranty and technical services.
If you find any abnormalities or malfunctions in the instrument, please contact the company in time to arrange the most convenient solution for you.
